RP2040 LEDs funktionieren nicht, keine SPI-Pinbelegung

RP2040

If you’re looking for a cheap and powerful microcontroller to play with, check out the Raspberry Pi RP2040. It’s the first MCU made by Raspberry Pi, with two Cortex-M0+ cores running at 133MHz—great for multitasking. It doesn’t have internal flash memory, but you can easily add external QSPI Flash, and most development boards have this already sorted.

The coolest part? Its programmable I/O (PIO) lets you simulate protocols like VGA, DVI, I²S, or even drive WS2812 LED strips—all just through code. It also has flexible USB support, so making keyboards, USB storage devices, or MIDI controllers is straightforward. Plus, it’s low-power, perfect for portable projects.

Overall, whether you’re an Arduino fan, into MicroPython, or just want something versatile and fun, the RP2040 is perfect for your next creative project.

RP2040 Pinout

When you’re working with the RP2040, its GPIO pins are extremely flexible. Almost any GPIO pin can handle functions like SPI, I2C, UART, PWM—just configure them in software. But keep in mind, ADC functions are only on GPIO26, 27, and 28, don’t mix those up if you’re measuring analog voltages.

Also, the USB interface uses pins 34 (USB_DM) and 35 (USB_DP), and you’ll need proper matching resistors. If you’re connecting external Flash memory, pins 39 to 44 are essential. The RUN pin resets or puts the chip into sleep mode when pulled low; adding a button here makes debugging easier.

The RP2040 comes in a small QFN-56 package, so be careful soldering to avoid shorts. Stick to 3.3V max for all IO pins, and don’t leave unused pins floating. Keep your power supply stable, and you’ll avoid many headaches.

Overall, the RP2040 is super user-friendly for creative projects—just pay attention to ADC, USB, and Flash connections, and you’ll have smooth sailing.

RP2040 Equivalent

If you’re looking to replace your RP2040 without redesigning your PCB, the ESP32-S3-PICO-1 is an excellent upgrade. It offers significantly better performance, built-in 8MB Flash, Wi-Fi, and Bluetooth. However, you should keep a few things in mind: it doesn’t have built-in ADC channels, so you’ll need an external ADC chip if required. Also, it doesn’t support RP2040’s unique PIO features like emulating VGA or controlling WS2812 LEDs directly.

Another thing to consider is power supply—RP2040 accepts voltages from 1.8 to 3.3V, but the ESP32-S3 needs a stable 3.0 to 3.6V supply. If your project doesn’t require wireless features, you can disable Wi-Fi and Bluetooth in software to reduce power usage.

Overall, if these points aren’t deal-breakers, ESP32-S3-PICO-1 is a powerful and convenient upgrade from the RP2040.

RP2040 Development Board Circuit

When building your RP2040 board, focus on these points: use APA2112K-3.3 to convert 5V to stable 3.3V with capacitors; 12MHz crystal provides stable clock; W25Q128JV Flash connects via QSPI; USB with 27Ω resistors enables easy programming; RESET and BOOT pins use pull-up resistors and buttons for easy operation mode changes; add 100nF decoupling capacitors near power pins. All IO pins are exposed for convenient expansion.

RP2040 USB Programming Example

Using RP2040 as a USB CDC virtual serial device is easy. Just connect your RP2040 board directly via USB—no extra wiring required. In Arduino IDE, select “Raspberry Pi Pico,” and the serial port will be auto-detected.

Your Arduino code just initializes serial communication, and once plugged in, your RP2040 appears as a virtual COM port. You can communicate with it directly using Arduino’s Serial Monitor or tools like Putty. Anything you send gets echoed back immediately.

Quick tip: The baud rate setting doesn’t actually matter for USB CDC—any number works fine. If your computer doesn’t detect the device, try using a better-quality USB cable.

RP2040 Raspberry Pi Pico Project

If you’re looking for a simple but useful RP2040 project, try building a temperature and humidity monitor with a Raspberry Pi Pico and a DHT22 sensor. Wiring is straightforward: VCC, GND, and DATA pins connect to the Pico’s 3.3V, GND, and GP15 respectively, with a 4.7kΩ resistor between DATA and VCC.

Using Arduino IDE, a few lines of code will have your sensor running. Connect it to your computer via USB to view real-time data. For upgrades, consider adding an OLED screen or an ESP8266 Wi-Fi module to enable remote monitoring and data logging.