Upload BOM
Cart ( 
TP4057 schematic & datasheet | vs TP4056 EVVO
- Battery Chemistry: Lithium Ion
- Charge Current - Max: 500mA
- Current - Charging: Constant - Programmable
- Package: SOT-23-6
FREE delivery for orders over HK$250.00
Quick response, quick quotaton
Flash shipment,no worries after sales
Original channel,guarantee of the authentic products
TP4056 vs. TP4057 Li-Ion Battery Charging Boards Quick Comparison 18650 And More
TP4056 vs TP4057
Differences between TP4056 VS TP4057 in Pin Configuration and Application Circuits:
| Comparison Item | TP4056 (SOP-8 Package) | TP4057 (SOT23-6 Package) |
|---|---|---|
| Chip Pins | 8-pin Package ① TEMP (Temperature sensing input) ② PROG (Charge current setting) ③ GND (Ground) ④ VCC (Power input) ⑤ BAT (Battery positive terminal) ⑥ STDBY (Charge complete indicator) ⑦ CHRG (Charging status indicator) ⑧ CE (Chip enable control) |
6-pin Package ① CHRG (Charging status indicator) ② GND (Ground) ③ BAT (Battery positive terminal) ④ VCC (Power input) ⑤ STDBY (Charge complete indicator) ⑥ PROG (Charge current setting) |
| Pin Differences Summary | Includes additional TEMP pin for temperature sensing. CE pin available for external control to enable/disable the chip. |
No TEMP pin for temperature sensing. No CE pin; chip is always enabled. |
| Application Circuit Differences | More complex; supports NTC thermistor (connected to TEMP pin) for battery temperature monitoring. Includes additional enable/disable functionality (via CE pin). |
Simpler; no temperature monitoring function, ideal for compact and space-constrained designs. |
| Maximum Charge Current | Up to 1A | Recommended maximum of 500mA |
| Charge Current Setting Formula | ICHG = 1200 / RPROG | ICHG = 1000 / RPROG |
| Typical Rprog Selection | 1.2kΩ resistor for 1A charge current | 2kΩ resistor for approximately 500mA charge current |
TP4056 VS TP4057 peripheral circuits, specific pin connections, and functions of each external component:
| Component | TP4056 Peripheral Circuit (Left Diagram) | TP4057 Peripheral Circuit (Right Diagram) |
|---|---|---|
| Input Current-Limiting Resistor | RL1 = 0.4Ω, connected to VCC (Pin 4) Limits input surge current to protect the chip from potential damage. |
Not Present (5V input directly to VCC, Pin 4) |
| Input Filter Capacitor | C1 = 10μF, connected between VCC (Pin 4) and GND (Pin 3) Reduces ripple noise and stabilizes input voltage. |
1μF, connected between VCC (Pin 4) and GND (Pin 2) Basic noise filtering for compact designs. |
| Output Filter Capacitor | C2 = 10μF, connected between BAT (Pin 5) and GND (Pin 3) Ensures stable battery voltage and reduces output ripple. |
10μF, connected between BAT (Pin 3) and GND (Pin 2) Same function: stabilizes battery voltage during charging. |
| Charging Status LEDs and Resistors | Two LEDs: – D1 with RL2=1kΩ resistor, connected to CHRG (Pin 7): indicates charging status. – D2 with RL3=1kΩ resistor, connected to STDBY (Pin 6): indicates charging completed or standby mode. |
Single LED with 1kΩ resistor connected to CHRG (Pin 1) Simplified indicator for charging status only. |
| Charge Current Setting Resistor (Rprog) | Rprog resistor connected between PROG (Pin 2) and GND (Pin 3) Determines charging current, e.g., 1.2kΩ sets approx. 1A. |
Rprog = 1.66kΩ, connected between PROG (Pin 6) and GND (Pin 2) Sets charging current around 600mA. |
| Temperature Sensing Resistor (NTC) | RL4 (10kΩ or NTC thermistor) connected between TEMP (Pin 1) and GND (Pin 3) Monitors battery temperature for enhanced safety during charging. |
No Temperature Sensing Capability |
| Chip Enable Control (CE Pin) | CE (Pin 8): external control signal Allows enabling or disabling the chip. |
No Enable Control Pin Chip always enabled by default. |
TP4056 Peripheral Circuit (Left Diagram):
1. More complex; includes temperature sensing, dual LED status indicators, input current limiting, and enable control.
2. Ideal for applications requiring higher safety and additional functionality.
TP4057 Peripheral Circuit (Right Diagram):
3. Simpler design; fewer external components, no temperature monitoring, single LED indicator, and always-on operation.
4. Ideal for compact, low-current, straightforward applications.
More Like This
MC5430F
Motorola
JD54LS51BCA
National Semiconductor
USPLSI2032VE-110LB49
Lattice Semiconductor Corporation
74S22PC
Rochester Electronics, LLC
9504DC
National Semiconductor
9005PC
National Semiconductor
9007DC
National Semiconductor
9004DC
National Semiconductor
SN74HC804DWR
Texas Instruments
SN700863DWR
Texas Instruments
4001BDMQB
National Semiconductor
54F02FMQB
National Semiconductor
Also Add to Cart
TPS4H000BQPWPRQ1
Texas Instruments
NET+50-QIN-3
Digi
MCIMX6S5DVM10AD
NXP USA Inc.
ISL12020MIRZ-T
Renesas Electronics America Inc
PI74FCT16244CTVEX
Diodes Incorporated
XC9142E34DMR-G
Torex Semiconductor Ltd
XC6801A421PR-G
Torex Semiconductor Ltd
MM74HC643AN
National Semiconductor
MIC5211-3.3/5.0BM6TR
Microchip Technology
TDA8541T/N1,112
NXP USA Inc.
S-80122ALPF-JAHTFU
ABLIC Inc.
ISL9228IRZ
Renesas Electronics America Inc
Related Products
MC5430F
Motorola
JD54LS51BCA
National Semiconductor
USPLSI2032VE-110LB49
Lattice Semiconductor Corporation
74S22PC
Rochester Electronics, LLC
9504DC
National Semiconductor
9005PC
National Semiconductor
9007DC
National Semiconductor
9004DC
National Semiconductor
SN74HC804DWR
Texas Instruments
SN700863DWR
Texas Instruments
4001BDMQB
National Semiconductor
54F02FMQB
National Semiconductor
DM54S20W/883
National Semiconductor
MC3129L
Motorola
4071BDM
National Semiconductor
MC9814P
Motorola
MC9825P
Motorola
74AC11000NS
Texas Instruments
MC5420L
Motorola
MC5401L
Motorola
MC5401F
Motorola
SN74H61N
Texas Instruments
MC5410F
Motorola
MC5430L
Motorola
SN74AS138N-J
Texas Instruments
CD4023BCN
Fairchild Semiconductor
4019BDC
National Semiconductor
74H40DC
National Semiconductor
5420FMQB
National Semiconductor
4025BDM
National Semiconductor
Please send RFQ , we will respond immediately.
