CL-30A hoja de datos, precio, pdf

CL-30 Features Overview

El CL-30 is a versatile and compact light sensor designed for use in a wide range of lighting control applications. It provides reliable and accurate detection of ambient light levels, making it ideal for automatic lighting systems, energy-efficient designs, and environmental monitoring.

Características principales:

• Wide Light Detection Range: Capable of detecting a broad range of ambient light levels, from low to high intensities.

• Compact Design: Small form factor, making it easy to integrate into various devices and systems.

• Bajo consumo de energía: Designed for energy-efficient operation, ideal for battery-powered systems.

• High Sensitivity: Provides accurate light readings, allowing for precise control over lighting systems.

• Easy Integration: Simple interface for seamless integration into microcontroller-based systems.

El CL-30 is perfect for applications that require reliable and efficient light sensing, helping optimize energy usage and automate lighting in various environments, from homes to industrial settings.

CL-30 Pinout

Pinout Usage and Notes:

El CL-30 has three pins: Vcc, Tierra, y OUT. The Vcc pin should be connected to the power source, and Tierra should be connected to the system ground. The OUT pin provides the light level signal, which can be either an analog voltage or a digital signal depending on the version of the sensor. Make sure to connect the OUT pin to the appropriate input on your microcontroller or circuit. When integrating the CL-30, ensure that the power supply is stable and within the recommended voltage range to avoid damaging the sensor.

CL-30 Equivalent Models

Replacement Considerations:

When considering a replacement for the CL-30, be sure to compare the light detection range, output type, y power supply requirements. The TSL2561 provides excellent precision but has a smaller range compared to the CL-30. The APDS-9301 is a more compact alternative with lower power usage, but it also comes with a reduced light range. If you need a sensor for specific environmental light sensing, the BH1750 could be a better fit, though it offers a smaller light range. Always ensure the replacement matches your system’s voltage and sensitivity needs.

CL-30 Thermistor Overview

El CL-30 thermistor is a high-quality, reliable temperature sensor designed for a wide range of applications, including temperature monitoring, control systems, and HVAC. With its fast response time and precise temperature sensitivity, the CL-30 thermistor is perfect for projects requiring accurate temperature measurements in both industrial and consumer applications.

Características principales:

• Wide Temperature Range: Provides accurate readings over a broad range of temperatures.

• High Sensitivity: Responds quickly to temperature changes, offering precise data.

• Compact Design: Easy to integrate into space-constrained designs.

• Stable Performance: Offers consistent and reliable performance over time.

Whether you’re working on a thermostat, a temperature-sensitive device, or an industrial system, the CL-30 thermistor ensures that your temperature monitoring is both accurate and efficient.

CL-30 Thermistor Circuit Analysis

El CL-30 is an NTC (Negative Temperature Coefficient) thermistor designed primarily for inrush current limiting in power supply circuits. Its resistance decreases as it heats up, allowing it to limit the initial surge of current when a device is powered on. This characteristic helps prevent damage to components and avoids tripping circuit breakers or blowing fuses.

Typical Application Circuit

In a typical application, the CL-30 is placed in series with the AC power input to the device. Upon initial power-up, the thermistor’s high resistance limits the inrush current. As current flows through it, the thermistor heats up, causing its resistance to drop, and allowing normal operating current to pass through.

Key Specifications

• Resistance at 25°C: 2.5 ohms

• Tolerancia: ±25%

• Maximum Steady-State Current: 8 A

• Maximum Energy Rating at 25°C: 43.2 J

• Operating Temperature Range: -50°C to +175°C

• Tipo de paquete: Radial leaded disc

Application Considerations

• Montaje: Ensure proper PCB design to accommodate the thermistor’s size and lead spacing.

• Calificación actual: Verify that the maximum steady-state current rating aligns with the application’s requirements.

• Gestión térmica: Consider the thermistor’s power dissipation and ensure adequate ventilation or heat sinking.

• Clasificación de voltaje: Ensure the thermistor’s energy rating is sufficient for the application’s inrush current.