ईएस1बी Diode Datasheet, Price onsemi

ES1B Pinout

The ES1B diode is a popular surface-mounted diode that’s known for its quick response and low forward voltage drop. With a maximum reverse voltage of 100V and current capacity up to 1A, it’s perfect for circuits where efficiency matters most. Thanks to its low voltage drop and fast recovery time, you’ll often see ES1B used in power rectifiers, DC-DC converters, protection circuits, and any application needing fast switching. It’s a practical choice for improving the overall performance and efficiency of electronic designs.
ES1B pinout

टिप्पणी:
The ES1B diode uses a standard two-pin surface-mount (SMA/DO-214AC) package. Always confirm the diode’s polarity before installing to prevent circuit damage or diode failure.

ES1B equivalent diode

All these diodes share the same package type (DO-214AB/SMC) and have comparable electrical characteristics, making them interchangeable in many applications depending on the specific voltage requirements.

ES1B diode circuit example

As shown in the circuit diagram, a flyback diode D4 (ES1B) is connected in parallel across the relay coil to suppress the high-voltage spike generated when the coil is switched off, thereby protecting transistor Q2 and other components.

When the relay coil is energized (Q2 turns on), the relay contacts switch state: NO2 and COM2 close, while NC2 and COM2 open. When the coil is de-energized (Q2 turns off), the relay contacts revert to their default state, where NC2 and COM2 close again.

ES1B vs ES1D fast recovery

Main difference:
The primary difference between ES1B and ES1D lies in the maximum repetitive reverse voltage (VRRM). ES1B supports up to 100 V, suitable for lower-voltage circuits, whereas ES1D supports up to 200 V, ideal for higher-voltage applications.

Application recommendation:
If your circuit’s reverse voltage doesn’t exceed 100 V, the ES1B is sufficient. If there’s a possibility of encountering reverse voltages higher than 100 V, the ES1D is recommended for enhanced reliability and safety.

ES1B 600v diode application

If you’re using the ES1B diode, remember it’s designed for applications around 100 volts—not 600 volts. If you’re dealing with higher voltages, say around 600 volts, you’ll want to use something like the ES1J diode instead, since it’s built specifically for higher-voltage scenarios. Typically, these fast-recovery diodes are great for things like high-frequency rectification in switching power supplies, providing protection against voltage spikes when you’re using inductive loads (think motors or relays), protecting your circuits from accidental reverse polarity, or handling voltage spikes with snubber circuits. Always make sure you choose a diode rated for your specific voltage needs to keep your circuits safe and reliable.