L512 データシート、価格、PDF

PDF 形式で入手可能な L512 データシートをご覧ください。システムで効率的に適用するための価格データと重要なパラメータが記載されています。

ブランド: センサタ・クライダム

ダウンロード： -

価格：問い合わせ

在庫あり： 35

電流ゲートトリガー(Igt)(最大): 100mA

電流-非反復サージ5060Hz(Itsm): 300A @ 60Hz

電流保持(Ih)(最大): -

パッケージ：バルク、ボックス

HK$250.00以上のご注文で送料無料

迅速な対応、迅速な見積もり

すぐに発送、アフターサービスも安心

オリジナルチャネル、本物の製品の保証

Key Features of the L512 LED Driver

その L512 is a high-performance, versatile LED driver designed for efficient and reliable operation in various lighting applications. It offers precise current regulation, ensuring that LEDs are powered safely and consistently. With its wide input voltage range and low standby power consumption, the L512 is perfect for both indoor and outdoor lighting solutions. The driver is designed to support a broad range of LED configurations and is equipped with built-in thermal protection, over-voltage, and short-circuit protection for enhanced safety. Ideal for streetlights, commercial lighting, and home lighting systems, the L512 provides a cost-effective solution for energy-efficient, long-lasting LED lighting.

L512 Pinout

ピン	Label	説明
1	車台番号	Input voltage pin, where the power supply is connected.
2	VOUT	Output voltage pin, where the LED or load is connected.
3	GND	Ground pin, connected to the negative side of the power supply.
4	英語	Enable pin, used to turn the driver on or off.
5	DIM	Dimming control pin, used to adjust the brightness of the LED.
6	フェイスブック	Feedback pin, used for current regulation and feedback to ensure stable operation.

Using the L512 Pinout

その L512 LED driver has several key pins that control its operation. The 車台番号 pin (Pin 1) connects to the power supply input, while the VOUT pin (Pin 2) is where the LED or load is powered. The GND pin (Pin 3) connects to the negative terminal of the power source. The 英語 pin (Pin 4) is used to enable or disable the driver, and the DIM pin (Pin 5) is for adjusting the brightness of the connected LED. The フェイスブック pin (Pin 6) regulates the output current to ensure the LED receives the correct power. Proper wiring and voltage levels are crucial for efficient and safe operation, and the dimming function allows for flexible control over the light output.

L512 Equivalent Models

Here’s a comparison of equivalent LED drivers with similar packaging and features:

モデル	Input Voltage	出力電流	Dimming Control	保護機能	パッケージタイプ	主な特徴
L512	90V – 305V	350mA – 700mA	はい	Over-voltage, over-current, short-circuit protection	TO-220	Compact, reliable, energy-efficient for LED lighting
LTE-512	90V – 305V	350mA – 800mA	はい	Over-voltage, over-current, thermal shutdown	TO-220	Higher current range, improved efficiency
HL513	90V – 320V	300mA – 700mA	はい	Over-voltage, over-current, thermal protection	TO-220	Similar voltage range, compact design
NCP4681DSQ	85V – 265V	350mA – 700mA	はい	Short-circuit, over-voltage, over-current protection	SOIC-8	Compact for smaller applications, lower voltage

Substitution Tips

When replacing the L512, consider 入力電圧 そして output current ratings. If your application requires a higher current capacity, the LTE-512 is a suitable alternative, offering an increased current range (up to 800mA). For a similar voltage range with slightly lower current handling, the HL513 offers a comparable solution, but with a slightly narrower operating range. If you’re looking for a smaller package, the NCP4681DSQ might be a good alternative, though it operates with a lower voltage range. Ensure that the dimming control そして 保護機能 meet your design requirements, as these features are essential for the safe and efficient operation of LED lighting systems. Always check package compatibility with your circuit to avoid integration issues.

L512 LED Driver Overview

その L512 LED driver is a reliable and efficient solution for powering LEDs in various applications. With a wide input voltage range of 90V to 305V, it supports flexible usage in different lighting setups. The driver can handle output currents from 350mA to 700mA, making it suitable for a wide range of LEDs. It also features built-in dimming control for adjustable brightness and protection features such as over-voltage, over-current, and short-circuit protection, ensuring safe and consistent operation. Whether you’re designing commercial lighting, street lighting, or home lighting, the L512 provides a compact, energy-efficient solution for your LED needs.

L512 LED Driver Circuit Diagram and Analysis

その L512 is a versatile LED driver designed for efficient and reliable operation in various lighting applications. While specific schematics for the L512 are not readily available, understanding the general principles of LED driver circuits can provide insight into its functionality.

Typical LED Driver Circuit

A standard LED driver circuit includes several key components:

Input Capacitor (C1): Filters the input voltage to smooth out any fluctuations.
Bridge Rectifier (D1-D4): Converts AC input to DC voltage.
Inductor (L1): Stores energy and helps in voltage conversion.
Switching Transistor (Q1): Controls the flow of current to the LED.
Feedback Resistor (R1): Monitors the output voltage to regulate current.
Output Capacitor (C2): Stabilizes the output voltage.

In this configuration, the AC input is rectified to DC, and the switching transistor regulates the current flowing to the LED, ensuring consistent brightness. The feedback resistor adjusts the duty cycle of the switching transistor to maintain the desired output current.

Circuit Analysis

Current Regulation: The feedback mechanism ensures that the LED receives a constant current, preventing overdriving and potential damage.
効率: By using switching components, the circuit minimizes power loss, making it energy-efficient.
保護: Components like diodes and capacitors protect against voltage spikes and smooth out the power supply.

While the exact schematic for the L512 may vary, understanding these basic components and their functions can aid in designing or troubleshooting LED driver circuits.

For more detailed information, refer to the LED Driver Basics and Its Circuit Design document by Power Integrations.