MMSD4148T1G | データシート | On Semiconductor | ダイオード onsemi

Mmsd4148t1g

When you’re choosing a diode like this, here’s what you’ll appreciate. It’s packed in a tiny SOD-123 package, perfect if you’re tight on PCB space. It handles up to 100V reverse voltage and has a steady current rating of 150mA, briefly managing up to 2A during surges.

Its super-fast switching speed—with a reverse recovery time of just about 4ns—makes it great for high-speed circuits like switch-mode power supplies and pulse circuits. Plus, its wide temperature range (-65°C to +150°C) means it’ll stay reliable even in tough environments.

This diode is also RoHS compliant, so you’re good on environmental standards too. It’s ideal for protecting circuits from reverse voltages, improving signal quality, or bridging logic signals at different voltage levels. Just keep your forward voltage around 1V at typical currents, and it’ll serve you reliably.

Mmsd4148t1g Pinout Polarity

When you’re using this diode, make sure you get the polarity right—the marked end (usually indicated by a stripe) is your cathode (K), and the other end is the anode (A). Mixing these up can lead to malfunctions or even damage.

Be cautious during soldering. Keep the heat moderate and solder quickly, ideally using low-temperature techniques like reflow soldering, to avoid damaging the diode.

Also, always double-check your circuit conditions to ensure the diode doesn’t exceed its specified limits of 100V reverse voltage and 150mA forward current.

Since this diode excels at high-speed switching, keep your PCB traces short and tight to get the best performance out of it in your signal circuits.

Mmsd4148t1g Equivalent

When you’re swapping out the MMSD4148T1G diode, here’s a quick tip: always check the replacement’s voltage and current ratings. For instance, if your circuit handles higher voltages, you might consider something like the BAV21WS-7-F, which can handle up to 200V. If you’re dealing with a slightly higher current, the 1N4148WS-7-F could be a better fit.

Also, if your application involves high-speed switching, choose a diode with a short reverse recovery time—models like MMSD4148T1G or 1N4148WS-7-F work well. Slower recovery types (like BAV21WS-7-F or BAV19WS) are fine for regular switching tasks.

All these replacements come in the same compact SOD-123 package, so you won’t have to redesign your PCB layout.

Mmsd4148t1g Diode Circuit Example

If you’re working with high-speed diodes like the MMSD4148T1G, here’s a practical circuit you can use to check its switching performance. You’ll start with a pulse generator providing quick square-wave signals through a 50Ω resistor and a small capacitor, ensuring you only measure dynamic changes without DC interference.

You’ll also have a stable DC bias from a 10V supply and adjustable resistors, plus an inductor (100μH) to keep the current steady during testing. Hooking up a high-speed sampling oscilloscope with a 50Ω input lets you see how fast your diode switches, checking crucial parameters like reverse recovery time and transient responses.

Remember to keep your wiring neat and short to avoid distortion, ensure your pulse settings stay within diode limits (100V, 150-200mA), and choose an oscilloscope fast enough (GHz range) to accurately capture these quick transitions.

Mmsd4148t1g Switching Speed Specification

If you’re working on circuits that need fast switching, the MMSD4148T1G diode is an excellent choice. It switches incredibly fast—typically around 4 nanoseconds for its reverse recovery time. This means it transitions from conducting to blocking very quickly, which is ideal for high-speed digital circuits, signal shaping, and efficient power supplies.

To get the most out of it, keep your PCB layout compact with short traces to reduce unwanted inductance and capacitance. Also, consider using a high-speed oscilloscope to properly measure and evaluate its performance in your design.

With its ultra-fast switching capabilities, the MMSD4148T1G is great for enhancing signal clarity, minimizing interference, and boosting efficiency in your high-frequency electronic projects.

Mmsd4148t1g Signal Diode Application

The MMSD4148T1G is a super handy high-speed diode known for switching incredibly fast—typically around 4ns. You’ll find it really useful in circuits that need precise signal shaping, voltage-level shifting, protection from voltage spikes, or high-speed logic operations.

For example, in signal shaping circuits, it quickly sharpens slow-changing signals into clear digital pulses, reducing jitter. When you’re connecting low-voltage logic to higher-voltage logic, this diode ensures your signals remain crisp and accurate.

It’s also excellent for switching circuits, providing clean, distortion-free pulses thanks to its rapid switching speed. Additionally, you can use it as a clamp diode in protection circuits, effectively safeguarding your components against sudden voltage spikes or static charges.

Just keep your wiring neat and compact to fully benefit from its fast switching capabilities.

Mmsd4148t1g Diode Protection Circuit

If you’re dealing with circuits sensitive to voltage spikes or static discharge, the MMSD4148T1G diode is your go-to protection device. It reacts extremely quickly (around 4ns), making it ideal to guard against sudden voltage surges or ESD.

For example, you can set it up as an ESD protector by placing it between your input signal line and ground. This diode immediately routes harmful voltage spikes safely to ground, preventing damage.

It’s also great as a voltage clamp—if your input voltage accidentally rises above safe levels, this diode kicks in quickly, limiting voltage and protecting your sensitive ICs.

Additionally, use it as a flyback diode with relays or motors. When these inductive loads switch off, they create high-voltage spikes. The MMSD4148T1G safely handles these surges.

Just remember, keep your PCB traces short and neat, and always respect its voltage (100V) and current (around 150mA) ratings to maintain reliability.