АТ89С51-24АУ технический паспорт, цена | pdf Atmel

At89s51-24au

If you’re using the AT89S51-24AU microcontroller, here’s what you’ll appreciate: it’s a reliable 8-bit chip based on the classic 8051 core, running up to 24MHz—fast enough for most everyday tasks. You’ve got 4KB of rewritable Flash memory, perfect for quick updates or small-scale projects, along with 128 bytes of RAM for basic data handling. Its 32 flexible I/O pins and built-in UART make connecting sensors or PCs straightforward. Plus, two built-in timers help with tasks like PWM and timing. Just remember: keep the power stable at 5V (±10%), and pay extra attention to your crystal and reset circuits to avoid headaches later.

At89s51-24au Pinout

When you’re hooking up this chip, remember these basics: pin 35 (VCC) needs a steady +5V supply, and pin 15 (GND) must be well-grounded. For your crystal, connect XTAL1 and XTAL2 with a crystal oscillator plus two 22pF capacitors—this gives you a stable clock. Don’t forget the reset pin (pin 4); connect it to VCC through a 10kΩ resistor, and maybe add a capacitor if you want automatic resets on startup. Port 0 might need pull-up resistors if you’re connecting external memory. Finally, tie EA (pin 26) to VCC for internal memory or ground for external. Keep your wiring neat to avoid glitches!

At89s51-24au Equivalent Microcontroller

At89s51-24au Minimum System Circuit

When you’re setting up this microcontroller, start with a stable +5V supply connected to pin 40 (VCC), and ground pin 20 (GND). Use a 12MHz crystal (Y1) with two 33pF capacitors at XTAL1 (pin 19) and XTAL2 (pin 18) for accurate timing. For resets, add a 10µF capacitor and a 10kΩ resistor with a reset button, giving you automatic and manual reset options. Include an ISP connector (CON6) for easy programming via pins P1.5, P1.6, and P1.7. Make sure your connections are neat—especially the crystal lines—and double-check resistor and capacitor values to ensure everything runs smoothly.

At89s51-24au Vs At89c51

If you’re thinking about replacing your AT89C51 with an AT89S51-24AU, here’s the deal: they’re pretty much identical in terms of performance and core features, but watch out for the packaging. The AT89S51-24AU comes in a compact TQFP-44 package, perfect if you’re tight on space, whereas the AT89C51 typically uses DIP-40 or PLCC-44, suited for traditional circuits. Also, the AT89S51 has a built-in power-on reset circuit—meaning less hassle for you—but you’ll need to tweak your design if you previously added your own reset circuitry. Lastly, just make sure your environment meets industrial temperature specs.

At89s51-24au Programming Using Isp

Here’s the deal with the AT89S51-24AU: it doesn’t directly support ISP (In-System Programming), so you can’t just program it right on the board. That’s because it lacks the internal hardware needed for ISP. You’ll have to burn your code externally using a dedicated programmer and then install the chip on your PCB afterward. But if easy online programming matters to you, consider upgrading to an ISP-compatible version like the AT89S52. This chip lets you program through a simple serial connection right on your board. Just make sure your ISP wiring matches the datasheet specs, and you’ll save lots of hassle!

At89s51-24au Keil Compiler Example

Let me quickly walk you through programming your AT89S51-24AU chip using Keil µVision. First, open Keil and create a new project (Project → New µVision Project). Select AT89S51 as your device. Then, add a new C file to write your code—like making LEDs blink or testing I/O pins. Next, set your crystal frequency (usually 12MHz), memory options, and select HEX as your output in “Options for Target.” Hit “Build,” and if everything goes smoothly, you’ll get your HEX file. Finally, upload this HEX file onto your chip using an external programmer (since AT89S51 doesn’t support ISP). Simple and quick!

At89s51-24au Fuse Bits Settings

If you’re working with the AT89S51-24AU, keep in mind it’s a classic 8051 microcontroller, so it doesn’t have fuse bits like AVR chips (such as ATmega or ATtiny). That means you won’t need to configure fuse bits for clock sources or startup conditions. Instead, all your settings come straight from your hardware connections—like choosing a crystal oscillator (usually 12MHz) or designing a simple RC reset circuit. However, it does have lock bits to protect your code from unauthorized reading, but these are totally different from fuse bits. So, setup here is straightforward—no complicated fuse settings required!

At89s51-24au Arduino Comparison

When you’re picking between Arduino UNO and AT89S51-24AU, here’s how I’d break it down for you:

Arduino UNO is super beginner-friendly. It comes loaded with handy features like built-in ADC, PWM, SPI, and I²C, plus plenty of libraries to make your life easy. You don’t even need a special programmer—just plug it into your computer via USB and start coding right away. Perfect if you want quick results, flexibility, or you’re learning and experimenting.

On the other hand, the AT89S51-24AU is great if your project is simple, set-in-stone, and you’re looking to produce a lot at low cost. Just remember, you’ll need an external programmer, and expanding its features requires extra hardware.

At89s51-24au Microcontroller Projects

If you’re just starting with microcontrollers, the AT89S51-24AU is a great choice because it’s cheap, simple, and perfect for basic projects. Begin with something easy like an LED chaser, learning how to control outputs and create delays. After that, try a buzzer that you can trigger with buttons—good for practicing input detection. Moving forward, building a digital timer or a numeric countdown display with seven-segment LEDs will sharpen your understanding of dynamic displays and timing logic.

Once you’re comfortable, level up with temperature monitoring using a DS18B20 sensor, or make an electronic password lock with a keypad—ideal for learning communication protocols and input scanning.

When you’re ready for something practical, tackle projects like infrared remote control or a smart temperature-controlled fan. Just keep in mind, you’ll need external modules for things like ADC or PWM since the AT89S51 doesn’t have those built-in. Also, remember to have a programmer handy, as this chip doesn’t support ISP programming.

At89s51-24au Embedded System Applications

If you’re thinking about using the AT89S51-24AU microcontroller, it’s a classic and reliable choice, especially if you’re looking to keep costs down. It’s widely used in basic embedded projects because it’s easy to work with and pretty robust.

In industrial setups, you can use it for simple data collection, like measuring temperature or humidity, and controlling equipment through relays—think automated doors or motorized curtains. For consumer electronics, it’s ideal for designing user-friendly control panels in appliances such as microwaves or washing machines, or even fun educational toys and beginner-friendly learning kits.

You’ll also see it in security systems, like keypad-controlled electronic door locks, smoke detectors, and simple alarm setups. For automation and measurement devices, you can easily build instruments like basic timers, counters, or temperature controllers. And if you’re interested in communication, it handles basic infrared remote controls or serial connections like RS232 or RS485 smoothly. It’s perfect for practical, everyday applications.