NE5534P Pinout & vs NE5534AP | NE5534AN Comparison

Discover the NE5534P Reference manual, covering pinout, applications, circuit design, and gain bandwidth product. Compare NE5534P vs NE5534AP and NE5534P vs NE5534N. Find equivalents, replacements, and upgrades for your projects. Optimize your electronic designs with our detailed manual.

Бренды: Техасские инструменты

Скачать: NE5534P Datasheet PDF

Цена: расследование

В наличии: 1,808

Тип усилителя: Общего назначения

Количество цепей: 1

Тип вывода: -

Упаковка: 8-DIP (0,300, 7,62 мм)

БЕСПЛАТНАЯ доставка для заказов свыше HK$250.00

Быстрый ответ, быстрая расценка

Быстрая отправка, никаких проблем после продажи

Оригинальный канал, гарантия подлинности продукции

NE5534P Pinout

Номер контакта	Имя	Описание
1	BALANCE	Used for offset voltage adjustment. Connect to a potentiometer for fine tuning.
2	IN−	Inverting input of the op-amp.
3	IN+	Non-inverting input of the op-amp.
4	В_СС−	Negative power supply (typically -15V).
5	COMP	Compensation pin for frequency stability.
6	ВНЕ	Output of the op-amp.
7	В_СС+	Positive power supply (typically +15V).
8	COMP/BAL	Can be used for either compensation or balance depending on circuit design.

The NE5534P is a high-performance low-noise operational amplifier widely used in audio and precision signal applications. When using the pinout:

Power supply connections (Pins 4 and 7) must be correctly provided, typically ±15V. Reversing polarity or applying incorrect voltages can damage the IC.

IN+ (Pin 3) and IN− (Pin 2) are the non-inverting and inverting inputs respectively. Signal sources should be connected here according to your desired amplifier configuration (inverting or non-inverting).

Pin 6 (OUT) is the output pin and should not be heavily loaded without proper buffering or compensation.

Pins 1 and 8 (BALANCE and COMP/BAL) are used for offset voltage trimming and frequency compensation. If not used, follow the datasheet guidelines for proper connection (e.g., sometimes tying to ground through a resistor or capacitor).

Pin 5 (COMP) is typically used for external compensation components to ensure stability in high-gain or wide-bandwidth applications.

Always consult the manufacturer’s datasheet when designing with the NE5534P to ensure optimal performance and safe operation.